Total views : 190
High-Melting Point Asphalt on the basis of High-Paraffin Oil Tar
Objectives: A special place among oil bitumen is occupied by refractory bitumen - bitumen of solid marks or, as they are called, solid bitumen. Methods: They differ from the liquid bitumen with high softening point and some other physical and chemical properties, conditioned by the technological mode of production. Bitumen of solid brands find their application in various sectors of the economy both in pure form, as the basic raw material, or as a mixture with various organic products and minerals as part of the production of a number of technical materials. Results: The positive qualities of refractory bitumen and asphaltites, making them indispensable for heat and water proofing of underground channel-free heat conductors are: high softening point; thermo plasticity, which excludes the appearance of cracks; watertight; low water absorption (up to 30 times less than bitumen perlite). The possibility of obtaining high-melting grades of bitumen from high-paraffin tar in the presence of a catalytic complex by “conventional oxidation” that is the raw material purge air, and without purging air using potassium permanganate as a source of molecular oxygen. It is shown that in “conventional oxidation” (sparing of oxygen of air) in the presence of a catalyst complex it is possible to achieve a high softening temperature - over 1000C - almost four times faster than using air purging without purging catalyst. Applications: Using the catalyst of atomic oxidation of petroleum residues showed that it took about 7 hours to reach the softening temperature of almost 1300C
Refractory Bitumen, High-Paraffin Tar, Oxidation, Catalytic Complex.
- Zaykina RF, Zaykin YA, Yagudin SG, Fahruddinov IM. Specific approaches to radiation processing of high-sulfuric oil. Radiation Physics and Chemistry. 2004 Sep-Oct; 71(1-2):467-70.
- Ramkumar S, Kirubakaran V. Review on admission of preheated vegetable oil in C.I. engine. Indian Journal of Science and Technology. 2016 Jan; 9(2):1-11.
- Mirkin G, Zaykina RF, Zaykin YA. Radiation methods for upgrading and refining of feedstock for oil chemistry. Radiation Physics and Chemistry. 2003 Jun; 67(3-4):311-4.
- Brodsky AM, Zvonov NV, Lavrovsky KP, Titov VB. Radiation-thermal conversion in petroleum fractions. Petroleum Chemistry U.S.S.R. 1962; 1(2):256-71.
- Aksenova TI, Daukeev DK, Iskakov BM, Zaykin YA, Mazhrenova NR, Nurkeeva AS. Investigations on radiation processing in Kazakhastan. Radiation Physics and Chemistry. 1995 Sep; 46(4-6):1401-4.
- Kuzhaeva AA, Berlinskiy IV. The Study of liquid phase adsorption on nanostructured sorbents in oil disperse systems. Indian journal of science and Technology. 2015 Dec; 8(36):1-5.
- Soni M. Waste to resource for sustainable development. Indian Journal of Science and Technology. 2016 Feb; 9(5):1-6.
- Kemalov AF, Kemalov RA. Development of the technology of macromolecular structuring of naphtha crude residues during their oxidation to produce bitumen insulation materials. World Applied Sciences Journal (Special Issue on Techniques and Technologies). 2013; 22:91-5.
- Petrov GV, Fokina SB. simultaneous extraction of selenium from indermediate products of extraction reprocessing of washing acid of copper production. Indian Journal of Science and Technology. 2016 May; 9(18):1-7.
- Kemalov RA, Stepin SN, Kemalov AF, Fakhrutdinov RZ, Diyarov IN, Ganieva TF. Manufacture of special asphalt varnish with improved properties. Chemistry and Technology of Fuels and Oils. 2003 Sep; 39(5):275-7.
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution 3.0 License.